TES Electrical Electronic Corp. AC Clamp Meter TES-3040

AC Clamp Meter

MODEL TES-3040
EN61010-1
600V INSTALLATION VAT III
POLLUTION DEGREE 2

3-3/4 Digital LCD with bar-graph

Auto-power off with Data Hold and MAX/MIN
aa-mode

Zero Adjustment/Relative Reading

TES-3040

Specifications for TES-3040

DC Voltage(AC/DC)
Range: DC - 400mV/4V/40V/400V/600V
aaaaaa-AC - 4V/40V/400V/600V
Accuracy: DC - 0.75% rdg + 2 dgts
aaaaaaaaa-AC - 1.5%rdg + 5dgts
Resolution: 0.1mV(DC); 0.001V (AC)
Input Impedance: 11MW
Overload Protection: DC 1100V & AC 800V

Ohms (Resistance)
Range: 400W/4KW/40KW/400KW/4MW/40MW
Accuracy: 1% rdg + 5dgts
Resolution: 0.1W
Overload Protection: 600Vrms
Max Open Circuit Voltage: 0.5VDC

Current(AC)
Range: 400/1000A
Accuracy: 2% rdg + 10 dgts
Resolution: 0.1A
Overload Protection: 1100A

Audible Continuity
Continuity beeper below 40W
Max Open Circuit Voltage: 0.5V
Overload Protection: 600Vrms

Frequency (Hz)
Range: 100Hz/1KHz/10KHz/100KHz/800KHz
Accuracy: 0.5% rdg + 5dgts
Resolution: 0.01Hz
Max Input Sensitivity: 100mV
Overload Protection: 1100A/600Vrms

Diode Test:
Resolution: 0.001V
Accuracy(50Hz-60Hz): 1% rdg + 2 dgts
Overload Protection: 600Vrms
Numerical Display:
3 3/4 digit liquid crystal display (LCD) maximum
reading 3999
Sampling Rate:
20 times/sec (Bargraph)2 times /sec (Digital Display)
Power Source:
one 006p; 9V or IEC 6F22 or NEDA 1604 Battery
Operating/Storage/Temperature & Humidity:
0^oC to 40^oC (32^oF to 104^oF) < 80%RH
-10^oC to 60^oC (14^oF to 140^oF)< 70%RH
Dimensions: 239(L) x 66(W) x 34(H) mm
Weight: Approx. 365g

TES Electrical Electronic Corp.
No. 57 Jen-Ai Road Sec. 2 TAIPEI, TAIWAN.
TEL : 886-2-2393-9142
FAX : 886-2-2395-9146
E-mail : [email protected]